| On Tapmatic
Self-Reversing Heads For Manual Applications:
 "We've
used our TAPMATIC 30X and other TAPMATIC heads
reliably for about 25 years. This is the first
time in 25 years that it has required any service.
The service was extremely reasonably priced. They
are wonderful tools."
Delzani Industries
Inc.
Edward J. Delzani, Owner
Rocky River, Ohio USA
Job Shop and Motorcycle Repair
"I´ve got 10 various
Tapmatic units and am a little more impressed with
them every day.Finest thing since sliced bread. We
can´t operate without them. I often wonder
how we ever produced enough product to sell and make
a living before our discovery of your product. The
inventor deserves world recognition. Thanks for a
wonderful product."
Darryl Barnett, Kellar
Manufacturing Inc.,
Grovetown, Georgia USA
"During a 4 year period
this 50X tapping head tapped 20,000--pieces a week
of a powdered metal part with a 7/16" x 12 stub
acme double lead x 1" through, at a production
rate of 520- pieces per hour for an approximate total
of 3,500,000 to 4,000,000-pieces. The tapping head
was then put into service again to tap 1/2" x
12 double lead x 1.060 through in 11L17 material,
of which we completed 4-orders each of 50,000-pieces.
At no time has this 50X head had any maintenance
or work done to it, and we still continue to use
it."
M.R. Bowen, President,
Bil-Mac Corporation,
Grandville, Michigan USA
"As a machine job shop,
we have kept our Tapmatic 30TC/DC busy as an every
day tool for about 6 years without a lick of trouble.
We have no idea how many tens or hundreds of thousands
of holes it has tapped. We also own SPD3 and 50 TC/DC
models."
Kenneth A. Regas, Owner,
Balboa Products,
San DiegoCaliforniaUSA |
RESULTS:
"Tapmatic
NCRT Cuts Cycle Time In Half- 30 seconds floor
to floor. Only one operation was required to complete
job. 250 plates completed in 2 hours, 2 threads
in each plate, 125mm center distance. Eliminating
machine reversal resulted in reduced machine wear
and tear." 
"Tapmatic
RDTIC Cut Cycle Time In Half, Increased Tap Life
300% And Reduced Machine Spindle Wear By Eliminating
Machine Reversal. Cycle time for 68 holes was reduced
from 6 minutes 34 seconds to 3 minutes 12 seconds
for a savings of 3 minutes 22 seconds. Cycle time
for 64 holes was reduced from 5 minutes 58 seconds
to 2 minutes 59 seconds for a savings of 2 minutes
59 seconds. Tapmatic increased tap life from 3000
holes per to 9000 holes per tap." 
"Tamatic
SynchroFlex Increased Tap Life From 72 Holes Per
Tap To 216 Holes Per Tap. Tap Costs Reduced from
$77.00 to $25.00 per day and production increased
from not changing taps so often. SFT50 paid for
itself in 7 days in tap cost savings alone." 
"Tapmatic
SFT Increased Tap Life By 100 to 150% With
Much Better Quality Threads. Threads consistently
gage correctly eliminating time consuming re-work." 
"Tapmatic
SynchroFlex Rigid Tap Driver Increased Tap Life From
1000 To Between 2400 & 2900 Holes Per Tap And
Provided Greater Security That All Holes Are Tapped
During An Unmanned Shift." 
